Raymarine GyroPlus Yaw Sensor Manual de Instalação descarregar pdf (Página 13)

Chapter 2: Setup Procedures

Many operating parameters are set during commissioning and may not need to be

changed again. However, if any of these parameters are not as you want them, you

can change:

• The response levels of the pilot.

• The language.

• The time/date format.

Refer to the ST70 Autopilot Controller/SmartPilot X Commissioning Instructions for

the appropriate procedures.

Other setup procedures may be useful on a day-to-day basis. These include:

• Changing the screen brightness level. See Brightness on page 7.

• Changing the screen colors.See Colors on page 7.

• Changing data units. See Units on page 8.

• Setting local time. See Time and date on page 9.

• Auto Tack Angle (sailboats only). See Auto Tack Angle on page 15.

• Enable or disable Gybe Inhibit (sailboats only). See Gybe Inhibit on page 15.

2.1 Using the menu navigation keys

Use the

key to enter the menu system.

Use the < and > keys to:

• scroll to the required option or setting.

• increase or decrease a setting.

Use the

ENTER

key to:

• select a menu option.

• accept a setting and exit to the previous screen.

Use the

CANCEL

key to exit to the previous screen without changing anything.

When you have made the changes you require, press

CANCEL

as many times as

required to exit to the Pilot View screen.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

Sem comentários

Raymarine GyroPlus Yaw Sensor Manual de Instalação Página 13