
offered by Busse-Yachtshop.com
Chapter 2: Installation -29
NMEA Input cable
The NMEA input cable is supplied with exposed wire connecting tails.These should
be connected to your existing NMEA instruments using suitable connector blocks
as follows:
Fish finder cable
The fishfinder cable is supplied with your Digital Sounder Module (DSM). This cable
should be run and connected to the rear of the display. A terminator must be fitted
to the cable at the DSM.
Function Color
NMEA Input (+ve) White
NMEA Input (-ve) common Green
Not connected Gray
NMEA Output (+ve) Yellow
NMEA Output (-ve) common Brown
Not connected Screen
Comentários a estes Manuais