Raymarine VolvoPenta IPS Autopilot System DPU Manual de Instalação descarregar pdf (Página 63)

Chapter 3: Adjusting SmartPilot Settings 53

AutoRelease (I/O drives only)

Only available if vessel type = STERNDRV.

AutoRelease provides emergency manual over-ride in situations when you need

to avoid an obstacle at the last moment. If the vessel type is set to STERN DRV

(I/O or stern drive), you will see the AutoRelease screen (AUTO RELSE) set to

ON as a default.

AutoTack angle

Note:

Only available if vessel type =

SAIL BOAT

The AutoTack angle is the angle through which the boat will turn when you select

an automatic tack.

Gybe inhibit

Note:

Only available if vessel type =

SAIL BOAT

With gybe inhibit on:

• you will be able to perform an AutoTack into the wind

• to prevent accidental gybes, the SmartPilot will prevent the boat from per-

forming an AutoTack away from the wind

With gybe inhibit off, you can perform an AutoTack into or away from the wind.

Screen Text Range

AUTO RELEASE ON = AutoRelease on (default)

OFF = AutoRelease off

Screen Text Options

AUTO TACK 40° to 125° in 1° steps

Screen Text Options

GYBE STOP On (Default) = Gybe inhibit on (gybes prevented)

OFF = Gybe inhibit off (gybes permitted)

81273_1.book Page 53 Monday, December 5, 2005 10:32 AM

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 79 80

Sem comentários

Raymarine VolvoPenta IPS Autopilot System DPU Manual de Instalação Página 63