Raymarine ST50 plus Manual do Utilizador descarregar pdf (Página 17)

ST50 Plus Tridata

and

Repeater Operation and Installation Handbook

Chaoter

5: CODE Lock

Securitv

II-

~I~

.-A-C.

nwx8e

buuc

LOCK

mpui:

ai:

Fewer-0n {page 24j

In the ‘Power-On mode’, the ST50 Plus is configured so that you have to

enter the four digit number on a ‘master’ digital instrument every time the

system is switched on.

Until this number is entered the

instrument(s) will not operate.

This mode is particularly useful when you are unable to position a ‘master’

instrument below decks and, therefore, all the vessels valuable instru-

mentation is left in a vulnerable area.

Should a CODE Locked instrument be removed from the system, it will

not operate until the correct four digit security number is entered or

received.

If your selected master instrument fails for any reason, the security code

number can be entered via another ST50 Plus instrument in the system.

However, until another instrument is set as a master or the existing

master is replaced, the security code will have to be entered every time

the system is switched on.

Note:

A warning sticker is provided with each instrument. If you have set

‘CODE Lock, position this warning sticker in a prominent location to deter

potential thieves.

Setting Up the Security Code

When the ST50 Plus Tridata is switched-on for the first time the security

feature is set to off. To turn the ‘CODE Lock’ feature on, proceed as

follows:

Gnce

Oniy

Eniry

Action Display Shows

Press and DEPTH and SPEED together

CALafter Zsecondsand

for 4 seconds CAL and software

version after 4 seconds

Press DEPTH twice

CAL CODE OFF

Press SPEED

---_

Press TRIP or RESET to select first

_ _ _

number

Press

SPEED

accept number

---

Press TRIP or RESET to select second

1 2 _ _

number

Press SPEED to accept number

2’-‘-

Press TRIP or RESET to select third

123-

number

9 Press SPEED

third

number

3’-’

10 Press TRIP or RESET to select fourth

1234

number

11 Press SPEED to accept code

12 Press SPEED

‘1234

‘S

13 To exit CODELOCK, press DEPTH and

Normal operation, eg.

SPEED together for 2 seconds

speed and depth

displavs

Note:

If you wish to cancel the code or change the number, simply re

enter and accept the current number.

Your Code Number

For future reference, enter your chosen code number into the following

box.

For obvious reasons, please store this handbook in a safe place.

Operation

Once only ‘CODE Lock’ entry is invisible once it has been set.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Comentários a estes Manuais

Ff 27 Mar 2025 | 12:48:45

Notice st50

Raymarine ST50 plus Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Raymarine ST50 plus