Raymarine ST60 Especificações descarregar pdf (Página 34)

22 ST60 Multi Instrument Owner’s Handbook

it is only suitable for use in positions where the instrument will not be exposed to

water.

To bracket mount your ST60 instrument, do so in accordance with the Control Unit

Mounting Bracket Instruction Sheet.

Auxiliary alarm option

The Auxiliary Alarm is waterproof and can be mounted on a panel either above or

below deck, as follows:

1. Drill a 7/8 in (22 mm) diameter hole through the mounting panel as shown.

2. Place the foam seal in position on the back of the Auxiliary Alarm.

3. Feed the two-way connector block and connecting wires through the drilled

hole.

4. Place the Auxiliary Alarm in position with the foam seal between it and the

mounting surface, and secure it using the four self-tapping screws (supplied).

5. Connect a 2-core cable to the connector block and run the other end of the

cable to the rear of the ST60 Multi instrument. The manner in which you run

45mm (1.8in)85mm (3.35in)

D4411_1

Auxiliary Alarm

55 mm

(2.15 in)

Auxiliary Alarm wiring

D4412-2

Auxiliary

Alarm

Foam gasket

Connector block

81039_4.book Page 22 Wednesday, March 24, 2004 3:14 PM

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

Sem comentários

Raymarine ST60 Especificações Página 34