Raymarine SmartPilot SPX-SAL Guia de Configuração descarregar pdf (Página 13)

Chapter 1: Installation and system overviews 5

Tools and equipment NOT supplied

You will need to supply the following equipment and tools:

Tools:

• Flat bladed screwdriver

• Power drill (cordless recommended).

• Bearing puller (optional - to remove the steering wheel).

•

in (4 mm) drill.

• Suitable wrenches/spanners.

Cables / equipment

• Power cable and fuse/breaker. See page 20.

• Additional data cables (e.g. for connection of GPS or chartplotter).

• Grounding braid. See page 25.

1.4 Create a schematic diagram

As part of the preparation for installing your SPX-5R Drive system, we recommend

that you create a schematic diagram representing the system you want to install. This

will help ensure that you install a safe optimum system, and so is particularly

important if you intend connecting your autopilot to other electronic equipment.

The schematic diagram should include:

• Location of all components. See page v and page 7 for EMC guidelines that may

affect the location of specific components.

• Connectors, cable types, routes and lengths.

When you have completed the schematic diagram, you are ready to begin installing

the SPX-5 Drive system.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 75 76

Sem comentários

Raymarine SmartPilot SPX-SAL Guia de Configuração Página 13