Raymarine SmartPilot SPX-SAL Guia de Configuração descarregar pdf (Página 36)

28 SmartPilot X-5R Drive Installation and Setup Guide

NMEA 0183 equipment

The SPX-5R Drive system can connect via an NMEA port to NMEA devices such as a

GPS or chartplotter.

Data bridging

The SPX-5R Pilot system acts as a bridge between SeaTalk and NMEA0183,

allowing NMEA and SeaTalk devices to share information.

For example, the information received from an NMEA GPS could be shared with a

SeaTalk instrument to provide a separate Course Over Ground display.

NMEA 0183 / Connecting other manufacturers’ equipment

• When connecting Raymarine equipment to other equipment using a non-

Raymarine cable, you MUST attach an appropriate suppression ferrite to the

cable near to the Raymarine unit.

• When connecting third party equipment refer to the manufacturer’s instructions

for cable details.

• You should not connect more than one piece of equipment to the Course

Computer NMEA input.

-ve

+ve

OUT

-ve

OUT

Screen not connected

NMEA DEVICE

-ve

OUT

+ve

OUT

+ve

-ve

D10539-1

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

Sem comentários

Raymarine SmartPilot SPX-SAL Guia de Configuração Página 36