Raymarine NMEA Multiplexer Especificações descarregar pdf (Página 17)

Configuration

The multiplexer can be configured with a configuration program called MPX-Config. This program

can be found on the accompanying CD. There is no installation procedure for this program, just

start it from the CD or copy it to a suitable folder on the hard disk of your computer and start it

from there.

The multiplexer itself is configured with proprietary NMEA sentences. MPX-Config sends these

sentences to the multiplexer when you change a control on the screen.

All configuration settings are stored in the multiplexer’s non-volatile memory. These settings are

retained without power supply.

Screenshot of MPX-Config

The screen is divided into four sections from top to bottom: the menu, the data area, the control

area and the status bar. The menu basically controls the MPX-Config program. The data area

shows the NMEA sentences that are received from the multiplexer. These sentences include the

NMEA data received by the multiplexer on its inputs as well as status messages generated by the

multiplexer. The latter can be recognised fairly easy: they all start with ‘$PSMD’. The control area

contains controls that determine the operation and configuration of the multiplexer. The status bar

shows the name or type of multiplexer that is connected, its internal software (firmware) version

number and its serial number. This information is useful when you need technical support. Also

shown are the optionally loaded or saved configuration file and a line counter when you have

started a log file.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Sem comentários

Raymarine NMEA Multiplexer Especificações Página 17